[Home]History of Art's Code

G200X Info | RecentChanges | Preferences | SourceForge Project Page


Revision 4 . . (edit) May 21, 2005 4:23 pm by xdsl-81-173-159-174.netcologne.de
Revision 3 . . February 5, 2005 12:13 am by adsl.redpoint.org.uk
Revision 2 . . February 4, 2005 1:55 am by blk-222-118-225.eastlink.ca
  

Difference (from prior major revision) (minor diff, author diff)

Changed: 1c1
Designed to work with the Mach2 software from http://www.artodcnc.ca/ this variant is probably the easiest to use from a beginners point of view, if seeking a complete application.
Designed to work with the Mach2 software from http://www.artofcnc.ca this variant is probably the easiest to use from a beginners point of view, if seeking a complete application

Changed: 3c3
The Geckoflash code program for the G2002 is called MainFirmware?.bin. This firmware program will make the slab operate in a "dumb" mode whereby it recieves a simple protocol of velocity words and feeds back inofrmation to the Mach2 program. It is incomplete in that it does not support homing or limit siwtches. All movement aspects do function however. This is a beta release and a test version on the path to full support in the G200x to be released later this year.
The Geckoflash code program for the G2002 is called MainFirmware?.bin. This firmware program will make the slab operate in a "dumb" mode whereby it recieves a simple protocol of velocity words and feeds back inofrmation to the Mach2 program. It is incomplete in that it does not support homing or limit siwtches. All movement aspects do function however. This is a beta release and a test version on the path to full support in the G200x to be released later this year.

G200X Info | RecentChanges | Preferences | SourceForge Project Page
Search: